911 Motorsports Tube Bending Jig For Roll Cage
Metal fabricators are very innovative and always aspire to make new and unique shapes out of any tube. The only problem is finding a tool that lets you design, twist, and craft different shapes from any tube. But that’s now water under the bridge because thanks to this roll cage tubing bender, you’ll achieve all the curves, rotations, and copes on whichever tube.
The benders have a yellow zinc plating and a black oxide coating for strength and corrosion resistance. They work best for 1 1/2″, 1 3/4″, and 2″ tubes and have two cope angles that increase from 10 up to 50.
Other attachments include two large yellow tubes and two small black tubes. Also included are two large and two small hinges, extension tubes, coped tubes, and thumbscrews. The unit also has a magnetic rotation gauge for measurement.
What we like
- Bends any tube to any desired angle
- Little time is required to set up the unit
- The hinges are vital in bend rotation
- Fewer materials go into waste because of the bender’s all-purpose attachments
- The pivot point helps in finding the right angle
Don't use plagiarised sources.Get your custom essay just from $11/page
What we don’t like
- The unit is pricey
- No dies included
- Baileigh RDB-25 Cast Iron Manual Tube Bending Kit
Baileigh is a renowned brand that produces high-quality and budget-friendly tubing bender pro tools. In this tubing bender reviews, however, we focus on the manually operated RDB-25 cast iron tube bending kit. It is the perfect set for beginners or hobbyists who are mindful of the budget.
As the name suggests, the bender is a product of a sturdy cast iron frame. It can correctly mount on either a bench or a pedestal. It also comes with eight round, and square tube dies. The dies have different dimensions with the smallest measuring ½-inch while the most massive being 1-inch in outside diameter.
The unit’s round tube capacity is 7/8-inches, the square tube capacity is 1-inches, and the wall thickness capacity is 0.047-inches. It can also make a full angular bend of 180.
What we like
- A carrying case included
- Comes with a wide range of dies
- The centerline radii produce smooth bends
- Robust cast iron frame
What we don’t like
- Only suitable for entry-level projects
- The dies are a bit rough
- YELLOW JACKET Ratchet Tube Bender – For Soft Copper & Aluminum
Yellow ratchet tube bender is a lightweight set that comes in a very stylish and sturdy carrying case. The set includes all the necessary tools for the hand bending of both soft copper and aluminum. The unbeatable quick change and reverse bending mandrels plus the ratchet mechanism make the bending activity fun and effortless.
If you’ve been looking for the best tubing bender for 1/2, 1/4, 3/8, 5/8, 3/4, 7/8, and 5/16 inch tubes, then your search ends here. The other fantastic thing about this set is that the benders have permanent index marks for stress-free identification even in low lights.
What we like
- Extremely lightweight
- The reverse bender works great
- Quick, tireless, and clean bends
- Excellent quality- durability is a guarantee
What we don’t like
- Best for soft metals only
- Quite expensive given that it only works on specific metal types
- Baileigh RDB-250 Electric Tubing Bender
Our last tubing bender reviews is the power-driven RDB-250 manufactured by the renowned Baileigh brand. With a 220V power capacity, this is, without any doubt, one of the best tubing bender for roll cage. So, while shopping for your next unit, you wouldn’t want to miss it.
The 32-inch wide bender has an angular bending capacity of 360 and covers all directions. Asides from that, its reliable power enables it to bend up to 2-1/2-inches tube and 2-inches schedule 40 pipe. The tubing bender has an internal memory control system that stores up to 170 programs. This enables it to perform ten bends per program.
Despite being an electric bender, you can also easily switch it to manual mode to save energy while performing soft bends. The strategically located foot pedal control aids in the manual operation. The unit works best for a wide range of round and square materials including stainless steel tubes and pipes, Chromalloy tubes, aluminum tubes, mild steel tubes and pipes, and so on.
What we like
- A touchable screen control system
- The unit works perfectly on an index table
- Versatility at its best
- The bender is programmable
- High power capacity and a manual operation option
What we don’t like
- Heavyweight thus not easily transferable
- Expensive