Pool Service Operations and Dangers Associated with failure

Pool services – This is a generalized word that is mainly used to refer to how well a poll can be categorized in terms of its cleanliness, maintenance and the general performance of its environs , for instance the machines used within the pool such as pumps.

Pools should be regularly serviced for humans to regularly use them. Below are examples of pool services to be regularly done and their dangers if not performed.

1. Emptying skimmers, pump baskets, and cleaner bags

They perform the function of filtering the water pools to ensure that water in the pool is super clean. For the pump baskets they operate by filling up the pool with water. If the pump baskets does not fill the water one has to prime it in order for it to pump the water to the pool. In case the servicing of pump baskets is not done, it might not be possible for water to be pumped into the pool. In the case of cleaner bags, they work by filtering the water whereby the dirt is hold back by cleaner bags. If the cleaner bag is not serviced, the dirt might not be hold back.

1. pump operations

For proper operations of the pump, it has to involve the use of seal. Seal enables effectives operation of the pump. Seal serves the following uses,

1. Ejecting out impurities from the pump.
2. Serves as a cooling system for the pump.

Seals functions under strict conditions, of which if the procedure are not followed it may lead to seal unreliability and will eventually reduce the effectiveness of the efficiency of the pump. Seals should always be serviced to ensure proper functioning alongside, proper use of it should be adhered to.

1. Filter operation and backwash

Backwashing refers to channeling water backwards through the filters. It also means reversing water through the bottom of the filter beds. Back washing is done to achieve water purity by removing impurities, without this service water impurities cannot be filtered out.

1. Pool cleaning operation

This are methods done by the pool attendees to ensure that pool sanity is super impressive. Disinfecting the water facilities is a major cleaning operation where germs are being killed. Sieving floating materials in the water surface ensures cleanliness of the pool. With this little actions, swimming pools are kept clean and tidy.

1. Vacuuming is another mode of cleaning.

Vacuuming is sometimes taken as an alternative to brushing, however it is highly recommended as it helps collect dirt and other material that may be at the bottom of the pool. Failure to use a vacuum could easily contribute to faster accumulation of algae

1. Wall brushing of the pools

This is essential as stagnant water attracts the growth of algae and fungal bacteria’s which are harmful to humans. With regular brushing of pool walls and floor, bacterial infections will immensely be reduced. In case of ignorance – this bacterial disasters will always strike.

1. Testing water samples

Pool water testing is done to assure the safeness of the swimmers when In the pool. This is so pivotal as one is able to know the pH of the water. Pool water testing can be done in the following ways;

• Taking sample of water from a water pool and then take it to a local pool store for analysis-this is mostly accurate.
• Use of test strips
• Use of a liquid test kit

1. Chemicals used in pool servicing

To prevent outbreak of diseases, chemicals are to be used. Pool chemicals can either be categorized as Oxidizers or Sanitizers.

Oxidizers are secondary sanitizers used to kill algae and bacteria. For sanitizers, they are chemicals used to keep water disinfected.

Example of a sanitizer;

• Bromine –used to stabilize the water ph. Works well in a warm water(hot water)

1. Why should empty containers be removed from pool room?

Empty containers should not be left in pool rooms because use of content unlabeled containers may result to catastrophe outcome. It is therefore advisable to leave the room tidy.

1. Skimming

This is the process through which debris and other material such as insects on the surface of the pool are scooped out. It is normally performed through the use of a skimmer fitted to a pool pole. It should be performed as regularly as possible.

1. Water ph.

The pH is an indication of how acidic or alkaline the water is. It is one of the chemical tests performed. The recommended pH should be pretty close to 7. Anything below 7 indicates acidity and above 7.6 indicates basicity. Usually if higher than 8 it could cause rashes while a more acidic environment could lead swimmers experiencing pain in the eyes.

1. Water Alkalinity

Also among the chemical tests performed. This refers to the amount of alkaline chemicals in the water that are required to maintain a given pH level. It is usually recommended to be around 80 and 120 ppm. Alkaline chemicals help balance chlorine levels which contributes to acidity of the pool water. When low the water will be very acidic and therefore cause damage to the surface of the pool and the swimmers as well.

1. Chlorine check

This is achieved by the chemical test kit. The recommended amount should be around 1 to 3 ppm .

1. Bromine Check

The standard should be 3 to 5 ppm (parts per million).

1. Timer Check

A timer is usually set to automatically switch on the pump. It should be ensured that it is functioning properly and is set to the correct time.

Conclusion

Swimming pools are considered a lot of work to maintain, but following the stated maintenance steps, goes a long way in ensuring that the pool remains well operational. Maintenance is key to prevent health hazards and undesirable situations such as growth of algae. The above steps may seem complex but there are several tutorials available online that could guide you to performing them yourself. Or if you may hire someone to do it for you.