best tips that will help you install that kitchen tap
A tap plays a pivotal role in our daily lives. As such, it should be installed in sensitive places of your home like in the kitchen and bathroom. This will make us live comfortably. But, tap installation isn’t something that should be taken lightly. It requires an expert as an inexperienced person can mess with the installation. If you have experience in installing taps, then you can do the task. Getting a tap installation service is very easy.
Are you looking for some tap installation tips? Then you are on the right platform because Tap and Faucet City Singapore offer you the best advice when it comes to tap installation. You must know the essential tips that will help you with the installation process. Below are some of the best tips that will help you install that kitchen tap;
Cut out the old faucet
The nuts joining the faucets together can be very hard to remove. It will take a lot of strength and time to remove these nuts from the faucet. If you wouldn’t mind, break the nuts so that you do not spend a lot of time removing them. There are three types of tools you can use for this. Don't use plagiarised sources.Get your custom essay just from $11/page
The rotary tool: this has a cutting disc. It is used to cut metal. It will help you when cutting the nuts.
Oscillating tool: this has a metal cutting blade. It will also help cut the nuts.
A screwdriver: this will be needed to remove out the nut from the faucet body.
If any other parts are hard to be removed, you can just cut them off. The pop-up drain especially can be very hard. Instead of wasting your time trying to remove it, it’s better to cut it off.
Mount the faucet with silicone
Silicone is the best for joining metal parts together. If you do not join the faucet properly with silicone, water can quickly get under the faucet. If that happens, it may damage your cabinet or countertop. This can happen during a kitchen tap installation. Imagine your kitchen cabinet having stains due to a leaking tap. This is unpleasant, right? Using silicon will ensure that it is properly fixed and that there are no leakages. It will also ensure that the faucet does not move around the tap. It holds it firmly into place; it is, therefore, not easy for the faucet to break. Remember, you should wipe off any excess silicone that might have dripped out using a paper towel and then by mineral spirits.
Check and upgrade the supply lines
This might be the hardest part of the kitchen tap installation. The supply lines need to be properly fixed so that there are no leakages. The old supply lines are way cheaper but very difficult when it comes to installation. The modern supply lines might be expensive, but they are worth the amount of money you buy them. This is because they are not as hectic as the old ones. A properly screwed nut helps in effective sealing. Also, ensure that you measure the supply lines. Measure the underside to determine the length of the supply lines. If the supply lines you bought with the faucets are not enough, you can buy extensions.
Check the loose valves
If the valves are loose, you should tighten them again. It will give an easy time when turning the valve. After this is done, and the valves are working correctly, remove the aerator before turning on the water.
Check for leaks
After you are done with the tap installation, and you are sure that everything is working, check for any leaks that might be there. Turn on the water and let it run for about three minutes. As you do this, ensure that every joint is dry. This will help you notice any leakages easily. This is because any wet spot will be more precise.
If you are looking forward to buying taps and also getting tap installation service, do not worry as we are here for you. We offer only but the best when it comes to tap services, and we are very reliable. Therefore, you don’t need to worry, just try us and you will be amazed by our services.