“How to choose wig density, wig density” a solution
Introduction to wing density and its need: People with partial or complete baldness had to face different ways of body shaming, and also people categorize them in a particular manner. Some people called them oldies etc. or whatever they like to call. Due to some pressure which they are continually facing, their brain starts thinking in a particular way, some people become thick-skinned, and all this has no effect on them, and many starts to look for remedies. Given below are some common questions which arise in the mind of that kind of person.
What is wig density?
Why wig density matter?
How many levels of density in the market, the most typical frequency?
Density and length, recommendation
Wig density recommends for the full lace wig.
Wig density recommend for lace front wig
Wig density recommend for 360 lace wig
How to choose your best wig density
What is hair density in wings?
When we talk about the hair density, it means how thick or thin hairs can be on a wig. In other words, it’s the amount of hair which are used on each wig cap. Density is the determining factor of how thick or thin strands can be. Many people confuse hair density with hair volume, but these are two different parameters altogether. As an example, when we try to compare wavy hair, straight hair and curly hair, their amount maybe differs, but their density is the same at least according to the eye of the viewer. It is more evident when you comb your hair out.
What are the different percentages or standards of wig density?
To answer that question how to choose wig density, wig density, different wig density standards were made which can be selected according to your need. These percentages are given below:
130% wig density
150% wig density
180% wig density
100% wig density
120% wig density
200% wig density
250% wig density
Before use, one should have identified which wig have which density because some wigs of 250% density look like 180%% density.
100% wig density: As compared to other densities, it is quite lightweight, it is so thin you can’t even feel it while you are wearing it. It has very little hair on the wig cap. It is for the people who have an excellent diameter or naturally thin hair, and they just want to imitate that natural texture because they often reported that it looks more natural to them.
120% wig density:
It is the average density of human hair. This wig density suits you more if you have yaki straight or silky straight hair. From all the densities it’s the most realistic one because it’s neither too thick nor thin.
130% wig density:
They have medium weight and are more close to the standard density of hair. Due to this reason, density is more suitable when you look for the full volume of hair. While looking for density always look for volume too.
150% density: This type of density is most appropriate for the ladies who want to natural look in their hair with an added fullness, a full style with a lot of bounce, body and movement. Few people thought that natural look of your full lace wig gets distorted with it.
180% wig density: This high-density wig type is designed for the people who want the full volume of hair. It is quite heavy for clients who are looking for full style. For its best look and use, try it on long hair.
200% wig density: This is the quite heavy density which is made for the ladies who want their hair more attractive and like the hair of the celebrities
Comparison between 150% and 130% wig density: These two categories are the most familiar ones. For any wig type, 130% is the standard density because it is neither so thick nor thin. It mainly focuses on hairline so that ventilation gets better at low density. Contrary to it 150% has very much natural appearance just fullness is slightly increased in this type as compared to 130%. This type has a lot of liquidity and a rebound.
Why wig density matters most?
During the use of wig density of the wig matters most because if a person needs a wig of 130% or 180% and he/ she gets a wig with lower density, then it doesn’t look right. Keeping in view the full lace wig hair density chart is essential because it helps you in choosing proper products fitting your right hair hairstyles according to that, it also lets you know suitable density according to your hair system. When you wanted the right hair wig density, it will not do any damage to your scalp and natural locks present underneath the surface. Light and medium hair density levels offer you a comfortable wearing. It is a lot easier for other people to analyze that the hair wig you are wearing doesn’t match your tresses. To get right hair care tips, you should know your wig density exactly. For different density type, a different kind of cares is needed. It also depends on how you comb and style your hair. For example, if your hair wig has a hair density of 130%, it is quite feasible to use light products to care for it. You should always opt and insist on the stylist for different styles for different densities. Don’t ever use such hairstyles which suits for thicker hair when you are wearing a thin hair wig. Heavy density is not good if you are looking for a curly wig, but sleek or straight hair requires medium hair density for a full lock.
How to choose wig density according to different needed parts of the head, and what are the length and density recommendation?
How to choose? While selecting a wig density following things should be kept in mind
Your natural density:
For mixing of artificial hair to natural ones, it is quite essential to know your natural hair density. You should choose a density which looks very much like your hair. It is also handy to consult with your dermatologist before deciding it. To look natural one need to choose the wig with the nearly same density as of natural hair
Your age at that time: Age or process of ageing has a lot to do with hair, their thinning and their colour change. Hair thinning is directly proportional to the increase in age. So if you want to be looked more natural, then you should choose lighter density as compared to the heavier ones. In this argument, thicker density will be the best to make you look younger.
You like for wig texture:
The thickness will vary according to the surface of different human beings Curly wig looked slightly fuller than the straight hair wigs in the same way short human wigs look a lot fuller than long human wigs. Natural black-coloured human wigs look better than 613 gold human wigs and wigs of other coloured.
Wig cap type: Irrespective of whether you are buying a lace front wig or full lace wig you will have various densities. Many people like full lace wig because its hair gets attached naturally as compared to buying a lace front wig that needs minimal hair and had higher density.
Personal liking or disliking: In the choice of the density of wig, another critical factor is your personal preference. Some women like thicker and Remy wigs while some prefer affordable thinner wigs. Despite all the advice, everyone will choose 100% according to his/her choice.
How to adjust high low-density hairstyles according to high and low densities? Density and thickness will matter a lot when you choose a new hairstyle. People who like high density for them hair should be layered. Because if you wear in this fashion, it will look more natural and realistic than wearing in the square method. Longer bob hair should be bought if you want bob wigs style. You can get a full look even when you like low density. Many people go blunt so that they can make their hair plump. It is also noted that cutting out ends straight will increase the volume of the hair. These day transparent lace wigs are available with the pre-plucked hairline, glueless, baby hair, no shedding, no tangles, smooth, soft and with thick ends at a low price.
What is optimum human hair density per square inch (psi)? It is almost impossible to find out the correct quantity of human hair thickness. If we try to count one by one strand, it will take us forever. In the past few years, scientists try to calculate hair density on rough bases just by picking the strands around a particular skin area. Through this method, we can identify the telogen and anagen phase of hair as well. These days density of human hair per square inch is assessed by phototrichum way.
What is phototrichogram? It is a photo machine which allows scientists to take a picture of every individual hair fibre. This is a quick method but not so trustable to calculate the actual density of hair accurately, apart from this low accuracy problem it is a favourite method of many scientists due to its convenience and time-saving procedure. It was the excellent work of phottrichorgram that we could that the human hair density for adults is about 200-300 fibres. The average density of human hair is mainly dependent upon different factors such as colour, age and location of observation. Hair density becomes lower if you are suffering from hair loss problem or any such disorder. Due to this reason, it is quite tough to find out the healthy hair density in human being.
How to decide hair length before selecting the wig? One thing that helps you in choosing the wig is the hair length. Whether you agree with it or not, but it’s a fact hair length, and hair density is closely related. As an example, you will expect to see the difference between 14 inches with 120% density and with 24 inches with 120% density. Length of every hair should go following a range of full lace wig density chart if it doesn’t happen then your hair wig looks entirely out of place. Density should go for 120% to 150% for the ladies who love to have hair length between 12-16 inches. The general relation between density and hair length is that the more your hair length, the higher should be the density, But all this is nothing more than a suggestion one can decide and alter density and length the way he/she wants.
How to use lace front wig density chart?
Here are the few deals to use lace front wig density chart
Extra light human hair lace wig density:
If your hair vendor doesn’t have his hair factory, this density is quite hard to find. There are 80-90% chances that you can’t able to buy wigs with this density because this density is entirely below the average. It is only suggested for women who love to have thin and beautiful hair. Wigs of this density can also encounter some shedding, particularly when its users don’t know its handling accurately, then its density can also diminish. Because it is already thin, you may not want it to become more fragile. Other deals regarding this are:
Light human hair lace wig density
Stock human hair lace wig density
Medium human hair wigs 150% density
The outcome of this discussion:
Baldness is a natural process, and it depends on age and genetics. It can happen to anyone. First and foremost point in this regard is that we should not bully the person who is having this problem because it can happen to us also, secondly if someone tries to have a wig or some other treatment we should encourage him and don’t make fun of him/her. A wig is something quite handy for such people, before getting wig one should always consult with experts and dermatologists so that he/she receives the right density for right hair length according to his/her choice.