Wet Sandblasting Kit Reviews
Have you been looking for a tool to clean and smoothen out surfaces at a higher speed and with more efficiency than you ever could? When you need to finalize a project, the method that you select for surface finishing is essential. The sandblaster tools can easily access corners and crevices that you cannot reach even when using other sanding tools. Sandblasting is ranked as one of the surest ways of removing rust, coatings and paint layers. Sandblasting is also warranted when a practical option for smoothening out surfaces is in order.
Sandblasting is divided into two distinct types that are the wet sandblasting and dry sandblasting. Wet sandblasting that is also known as vapour blasting is a high powered stream of water and media that get mixed. You can view it only as a hybrid between water blasting and straight sandblasting. Wet sandblasting is used mostly in occasions where you would likely want to avoid a dust cloud. Then there is the dry sandblasting. I will not put much emphasis on it. It combines abrasive material and high-pressure air. These two types of sandblasting are said to be a fast method to clear your surfaces, and they do not take up much of your time.
Tool Daily 2500 PSI Pressure Washer Sandblasting Kit Reviews
If you are on the hunt for a fantastic sandblaster that can take over most domestic tasks and one that does not put a dent in your pocket, then you should get yourself the Tool Daily. The Tool Daily is ideal in cases where you have a pressure washer that is either light or medium-duty pressure washer since it works perfectly with pressures of maximum 2500 PSI. The sandblasting kit I have recommended is made of quite cheap materials, but this should not put you off. It is a fantastic tool to have with you if you do not have plans of sandblasting on more than a few occasions.
For application purposes, the Tool Daily pressure washer sandblaster kit is mainly for use in abrasive cleaning. It also serves other purposes entirely, for example, removing graffiti, paint, baked-on grease and finally eliminating dust. The pressure washer sandblasting attachments use washed and dried sand from rivers or baking soda and dry silica sand. For its price and quality, this pressure washer sandblasting kit is great though it has a few drawbacks which are not uncommon for products.
Pros and cons
Pros
- It has a ¼ inch quick connect.
- The maximum working pressure can go up to a limit of 2500 PSI.
- Can be used on a variety of surfaces.
- It serves its purpose for both wet and dry.
- Excellent choice for metals.
- The nozzle tip is ceramic.
- Comes with a sand hose that is ten inches long.
Don't use plagiarised sources.Get your custom essay just from $11/page
Cons
- Plastic sand wand.
- Generates clouds of dust during sandblasting.
- Might create water containment issues by clogging.
Wet Sandblasting Kit Features
This wet sandblaster for the pressure washer is suction-fed injection of sand into water systems.
The sandblasting kit is made with a ten feet long rubber hose that is long enough to be able to reach your sand bucket and also not too long to lose its suction power.
The ten-inch sand wand for sand input is made out of sturdy plastic materials. The sand wand has a tip that is designed perfectly for optimal sand suction without any jamming.
For the pressure washer wand, its measurement is sixteen inches long and fits into any standard ¼ inch pressure washer connector.
Also, for the permanent nozzle that is the output, it is made of thick plastic that has a replaceable ceramic material tip.
2500 PSI working pressure for the pressure washer sandblaster attachment.
Temperature goes up to 140 degrees Fahrenheit or 60 degrees Celsius at its maximum.
Safety is another feature that has to be one of those in consideration; therefore, you also have the advantage of getting protective eyeglasses with this sandblaster.
Things We Liked About It
For the price that you get the wet sandblasting kit at its great features makes it all the more worthwhile. The pressure washer is more efficient and a safer accessory that aims at reducing the tiredness that comes with spraying and cleaning in your home, workplace or even gardens.
Things We didn’t Like
Though the pressure washer sandblasting kit will easily strip paint and rust, it can tend to clog up just as you are using it. The pipe that is used to suck sand out of the sand bucket can quickly fill up with water, and the sand that is inside might get stuck and clog your pipe.
Buying Guide
You require to get the right wet sandblasting kit to do the trick for you on your projects. I hope that this buying guide will provide you with a better understanding of what choices you have to make. Here are some of the factors that you have to check out for before making your choice;
- PSI and GPM ratings
I bet that by now you have come across these two terms if you are on a pressure washer hunt. PSI stands for Per Square Inch which can go from 800 minimum to 10,000 maximum. When it comes to portable pressure washers, they can range from 800 to 2000 PSI. Then there is the GPM that is the Gallons Per Minute that tells you how much water the pusher pushes out. When working with a sandbag extension on a pressure washer, you require the PSI and GPM to match that of the sandblasting kit. A poorly rated sandblasting kit cannot withstand the pressurized water that comes from a high powered gas pressure washer.
- Nozzle Tip Material
A sandblaster is for removing paint or rust, and this might require a lot of force to be exerted from the nozzle tip. Therefore the nozzle tip needs to be keen to persevere the force and power that the sand and water mixture gets exerted with during sandblasting. Choosing the right type of nozzle ensures that you can sandblast for a long time without having to replace the nozzle tip. Hare are some of the different types that are available and highly rated;
- Carbide
This tip made from carbon and metal, which are very strong and durable. The nozzle tip is the most resistant to wear and tear. The carbide material does not corrode, making it great for people using pressure washers to sandblast.
- Ceramic
This is the most common nozzle tip used in sandblasting. It takes up a good ratio of both price and durability for most customers. Ceramics are made from natural materials and are amazingly very resistant to any form of sand abrasion. In comparison to the carbide tip, they are surprisingly affordable.
- Steel
This is not the most common type of material for the nozzle tip. You might be thinking that the steel material is way better off than the ceramic material, but it is not so. Steel, in this case, wears out quite quickly when in exposure to the slurry sand and pressurized water. Though steel is a great and durable material, it does not precisely fit being on the nozzle tip.
- Sand intake
A way for the sand to find its way to the pressurized water since this is a sandblasting kit. Sand intake is mainly made up of two main parts; there are the hose and the wand.
- Hose
The hose gets used to transport water from the sandbag or the bucket into the nozzle tip where it gets mixed with water. It then gets sprayed onto the surface that you have your nozzle pointing at during this process. Being one of the longer-lasting parts of the sandblasting kit the hose does not suffer quite a lot of damage. It is why hoses get made of either rubber or plastic but not metal. For sufficiency in sand intake, you are required to ensure that you do not get yourself the 20 feet or longer hoses.
- Wand
It is what you stick into the sandbag or the bucket. Then suck in the sand to bring it to the hose. The wand should, therefore, be powerful, and this solely depends on your budget and preferences. You get to either choose from hard plastic materials or the steel material though the steel material is a preference due to its durability.
Frequently Asked Questions
- Pretty Darn Good Product?
Yes. Putting in mind that this is a powerful machine, you must have the assurance that it is a great product. It comes with instructions that you have to read and follow, and by doing this, you have enough confidence in the fact that this is the best wet sandblasting kit product.
- Is it Good Performance?
Yes. It is highly rated by most of those who have had to use this product, and I would also say it has an amazing and satisfactory performance. You can be sure of getting the best output for yourself and your customers, ensuring your work is approved and appreciated.
- What Is The Spray Pattern and Area?
The spray pattern and area is just a round pattern that is approximately ¼ of an inch wide. For this sandblasting process, you only require to move the wand tip continuously over the surfaces and the area that you need to blast. Play sand is the best media recommendation that you can use with this wand.
- Does it have a Replaceable Ceramic Nozzle?
No. The ceramic nozzle is not replaceable. For the ceramic nozzle, I have stated that it is a durable material to use on the nozzle tip. For its price, I would not recommend careless handling of the ceramic nozzle; therefore, it is not worth joking around with considering its worth.
Conclusion
Sandblasting is the ultimate solution for all your rust and paint issues; you can restore rusty items and strip off paint easily. I have written this review in the sense that you will have the necessary guidelines at your fingertips to ease your work on wet sandblasting kit reviews. I hope the information provided will be useful to you.