What are the steps involved in changing the Brake pads of a GM car?
The brakes on your GM car wear out with time and times come when you must replace worn-out brake rotors and brake pads for maximum stopping power. After you’ve found out that the brake pads and rotors of your GM auto must be replaced, you must make plans to do so. Often, drivers entrust the job to a brake shop or service center. However, several like doing this work themselves. Brakes are among the essential components of a car. However, the serviceable part of a car’s braking system has a relatively simple design. Thus, many car owners prefer replacing the brake themselves.
Some parts are needed for changing the brakes of a GM auto. Among them are brake pads, brake rotors, and a suitable brake pad lubricant.
Below are step-by-step instructions on performing the brake job.
Step-by-step instructions on changing General motors Brake pads
A robust jack is a must-have for lifting the vehicle from the ground. Keep gloves, safety glasses, and supplemental lighting close. Keep the sockets, ratchets, wrenches, and other provisions close. An impact gun facilitates the removal of the car wheels to expose the brake system parts. This is where the work is done.
The first step in replacing GM Brake pads is removing the brake caliper. Attached to the caliper is a rubber span of brake-line, and this must not be strained. Thus, a metal hook is a must-have for holding it up. If the car owner has difficulty removing the caliper by hand, he or she could need a pry-bar.. Don't use plagiarised sources.Get your custom essay just from $11/page
The car owner must also compress the caliper pistons into the caliper. This ensures that it’s going to fit over the brake rotor at the time of reinstallation. Usually, a car owner will need a C-clamp for squeezing the pistons back in position.
Next, the car owner needs to follow the explicit instructions for the installation and lubrication of the brake pads. The remainder of the replacement of GM Brake pads generally requires the re-assembly of all detached components.
Two more important points
On the completion of the brake job and the wheels reattached, the car owner must
- Start the engine
- Brake several times
With some plods on the brakes, the feel will improve. The car owner must not start driving until he or she is sure of the brake pedal feel and pressure.
New pads are likely to have a break-in process. The car owner may need to follow steps on his or her initial post-GM Brake pads-job drive. Detailed break-in instructions are present in the papers that came with the new brake pads.
As you can see, changing the brakes of your GM car is quite easy and does not need professional help. The car owner needs to give some time, have the right information, and have the proper tools to do so. It is a peaceful weekend activity that is revealing and saves money.