What are the steps to replace and repair your window screens?
Window screens are great at keeping the pesky bugs and pests away while bringing in the fresh air. But, the problem is that window screens tend to get easily damaged after a couple of years. The wood can end up shrinking, and the aluminum windows can lead to warping. There is nothing to worry about because these are common situations. There are ways to effectively replace and repair window screens.
Steps to replace your window screen
Regardless of whether you have an aluminum or wooden window frame, the following are the steps to follow for replacing window screen meshes:
- Prying up the screen-spline- You will have to pry the screen spline from the grooves around the frame’s edge using a screwdriver.
- Stretching the screen fabric- The new screen material has to be tightly stretched over the window frame to make it overlap the retained grooves while leaving extra screens to hang over the frame so that you can staple it easily. Use thumbtacks or staples to keep that in place.
- Securing the screen to the spline- You should use wire brads to nail the wooden screen in place. Use spline rollers for pressing the spline in the grooves in case of aluminum screens.
- Trim out the extra part- Cut off any extra part with a utility knife or scissors after the screen has securely placed on the frame.
Don't use plagiarised sources.Get your custom essay just from $11/page
Use screws, angle plates, or fasteners for reinforcing loose joints on the wooden frames.
Steps to repair your window screen
Pre-manufactured patches and glue are useful in fixing minor tears and holes in michigan screen & window repair. There is no need for removing the window unit to make the repair. Fiberglass screens are also fixed by sewing patches over the holes.
Measurement- It is difficult to repair big holes in the window screens. It is important to measure the patch to make sure it is effectively repaired and does not affect the function of the window screen.
Affixing the patch- Place the patch over the holes in the fiberglass or plastic screen to make sure that the hole gets covered, leaving enough on every side for folding over the end of the patch.
Securing the patch- You should use waterproof glue sparingly to secure patch edges. Wipe the drips of glue before it hardens for proper michigan screen & window repair.
Though you can take these steps yourself to effectively repair or place your window screens, it still helps to get a professional to help you out in this matter. Their work will be cleaner and more precise than yours. They will also make sure that the work gets completed quickly.