what is the difference between a double and single bevel miter saw

what is the difference between a double and single bevel miter saw

Since the introduction of miter saws in the early 1970s, it has retained its seat as a must-have tool in any woodwork settings. The difference between a single and double bevel miter saw

Since the introduction of meter saws in the early 1970s, it has retained its seat as a must have tool in any woodwork settings. The power tool is handy in making quick angled, straight and sloped (beveled) cuts on a stock.

The manufacturers have improved how the meter saws operate to give satisfying results to users. Both the single and double bevel miter saws make straight, angled and beveled cuts. In this article, we will elaborate on the difference between the single and double bevel meter saws.

The difference can best be explained from the operations point of view. The single and double bevel miter saws both make angled cuts on the face of a piece. That means you set the angle on the face of the piece, which is always less than 90 degrees, and plunge into the material.

So, where is the difference?

The difference is on how the blade spins on each set of saws. The single bevel miter saw can only cut on one side of the material. It could either be on the left or on the right side. On the other hand, the double bevel miter saw’s blade will rotate and make cuts on both the right and on the left side of the material.

Which bevel meter saw do you choose?

From the above point of operations, it’s easy to deduce which tool is more suited for your needs.

When working with the single bevel miter saw, after making the first slanted cut, you will have to flip the stock over to the other side for a similar cut. This movement will have some ramifications. First, you will consume more time in moving the stock over and over again. Still, movements and settings will affect the cutting accuracy. However, with the double bevel meter saw, you just tilt the blade without moving the stock and making a similar bevel cut. With this saw, you save time and make very accurate and similar edges. It’s the tool of choice for large projects and for professionals. The dual saw has its share of shortcomings. The added features make its operations more complicated for beginners. Besides, it’s more expensive compared to the single bevel miter saw. On the other hand, the single bevel miter saws are cheaper, easy to use even by beginners. Its handy for small tasks with no deadlines.

Sliding versus non-sliding miter saw

Miter saws can further be categorized into sliding or non-sliding miter saws.

What factors keep these tools apart?

From the name sliding, it means the saw is covering an extended distance. The saw has added rails that allow you to move the head back and forth as you cut. This feature allows the saw to cut larger board sizes of up to 12 inches.

The non-sliding miter saw, as the name suggest is a stationary cutting tool. The non-sliding saw makes the cross cuts, bevel, compound, and angled cuts. Its cutting length is limited by the size of the blade. The non-sliding saw can cut up to 6 inches. This length is satisfactory for cutting most trim boards that measure 4 inches.

Which one do you choose?

Choosing the right tool will depend on the projects that you are covering. When making window trims, frames or numerous crown moldings, the non-sliding miter saw is recommended. They will make quick 45 degrees cuts that are suitable for products that require joining together. Besides, the short cutting distance gives more freedom in cutting other shapes apart from straight cuts. However, when you require more complex cuts, the sliding miter saw will carry the day. The long cutting distance increases the rate of work covered in a short period. Besides, it cuts longer pieces without the need to flip over from time to time. It’s a handy tool when making large precise cuts. However, it is bulky and heavy making it less portable for offsite jobs. On cost implications, the sliding saw is quiet expensive compared with the non-sliding.

Final thoughts

After careful considerations, what matters most is the project that is before you. However, some factors like cost and the tool that will cover more jobs are top priorities. For beginners, it’s advisable to purchase the cheaper and portable non-sliding miter saw. This tool will be perfect before you move on to the complex sliding miter saw’s jobs.

What does double bevel mean on a meter saw?

Double bevel on a meter saw means that the power tool has adjustable blade that allows you to make an angled cut on the face of the board and just flips over to the other side for a similar cut. The essence of having the double bevel is that you make a cut on the board and slide it down then spin the blade for the corresponding cut. The double bevel saw is handy when making intricate cuts on crown boards, braces and furniture legs. The power tool assures you of accuracy on these cuts. Precision ensures that the pieces fit in when it comes to assembling.

How do you identify the double bevel meter saw?

There is a great chance that you may not locate the double bevel saw in an assembly of miter saws. However, it’s easily identified by the “V” shaped cutout that is designed to allow for the low angle cuts on both sides. The single bevel saw will have a low angle cutout on the left side only.

What is the difference between the single bevel and double bevel broadhead?

Welcome to the world of wild hunting!

For lovers of game hunting, the hunting gear is of paramount importance. Besides the hunter being ready and tough for the hunting scene, you need a ready to pierce spear. The broadhead is the most important part in the spear. It is attached to the shaft of the hunting spear with the sole reason of penetrating the animal to make a kill.

The broadhead could either be single bevel or double beveled.

What is a single beveled broadhead?

The single beveled broadhead is the penetrating part of a spear that has an inclination in relation to the adjacent surface. That means the surface is not at right angle in comparison to the other surface. In succinctly, it can be sharpened on one side only.

What is a double beveled bradhead?

In the double beveled brandhead, the cutting surface is inclined on both sides. In succinctly, it can be sharpened on both sides.

Why choose the single beveled broadhead over the double beveled broadhead?

When you fire a spear, both the single and double beveled broadhead will travel at similar speed and accuracy. The difference starts when either comes into contact with the animal’s bone. The double beveled braodhead will pierce and force its way through the bone with a dead end. However, with the single beveled broadhead, the action does not end there. The inclined side tends to cause a torque (rotation like force) that increases the penetration power. The increased power causes massive bone splitting with effective killing of the animal.

How does the torque (rotation) come about?

The one sided bevel is the reason for this rotation. When the broadhead penetrates the flesh, the pressure exerted on the unbeveled side pushes against the flesh. The flesh exerts equal opposing pressure forcing the boardhead’s beveled edge to rotate.

What is a bevel cut?

A bevel cut is when you make a cut on the edge of a board at a lesser angle than 90 degrees. Usually the boards are squared with the edges running at 90 degrees. If you cut this edge at any angle, then you are making a bevel cut. It can also be termed as a cut on the face of the board. The reason for this term is that when you make the cut, it will appear as if a part of the face has been slashed off.

Bevel cuts make furniture look more elegant when introduced on picture frames, cabinet trims and interior moldings. Besides, they give additional support for welding and increase the surface area on an edge for more stability. A bevel cut will join two pieces making them appear as one. The joint is completely concealed for aesthetic purposes in areas where a joint would appear undesirable.

Single bevel verses double bevel knife

Let’s briefly visit the chef’s world where we compare the single and double beveled knives.

The single bevel knife has one of its edges grounded with the other side lying flat. The angle of the grounded side ranges from 15 to 25 degrees. This range gives a wide area of choice for various applications.

The double bevel knife has both sides grounded forming ‘V’ shapes at the meeting point. This shape makes it more resistant to cracking and rolling. It’s smaller in size and more popular in homes.

Why choose the double bevel over the single bevel?

The double bevel knife is for a general user who doesn’t need a specialized cutting knife. It requires no special skills making it useful for the common chores like cutting vegetables, fruits and so forth. On the other hand, the beveled knife has more accurate and easier cuts on tough materials. This handy advantage arises when all the cutting force is exerted on the one side of the blade. Besides, it has cleaner cuts and is easier to sharpen. The professional chefs prefer this beveled knife despite of its high cost as compared with the double beveled knife.

Why do you need dual bevel meter saw?

A dual bevel meter saw has a blade that rotates to cut on both sides of the material. This feature gives the woodworker some advantages.

1. Speed

Working with a dual bevel reduces the time taken in cutting a huge pile of boards. It is a tool of choice for large construction sites and in big projects.

2. Accuracy

Precision is maintained with same settings for all your cuts. You just tilt the blade and reposition the material for the corresponding cut.

3. Easier operations

Rotating the material after every cut is very tiring. The double bevel saw alleviates this problem by just rotating the blade for the next cut.

The power tool is handy in making quick angled, straight, and sloped (beveled) cuts on stock.

The manufacturers have improved how the meter saws operate to give satisfying results to users. Both the single and double bevel miter saws make straight, angled and beveled cuts. In this article, we will elaborate on the difference between the single and double bevel meter saws.

The two meters differ from the operations point of view. Both make angled cuts on the face of a piece. That means you set the angle on the face of the board, which is always less than 90 degrees, and plunge into the material.

So, where is the difference?

The difference is on how the blade spins on each set of saws. The single bevel miter saw can only cut on one side of the material. It could either be on the left or the right side. On the other hand, the double bevel miter saw’s blade will rotate and make cuts on both the right and on the left side of the material.

Which bevel miter saw do you choose?

From the above point of operations, it’s easy to deduce which tool is more suited for your needs.

When working with the single bevel miter saw, after making the first slanted cut, you will have to flip the stock over to the other side for a similar cut. This movement will have some ramifications. First, you will consume more time in moving the stock over and over again. Still, moving the wood and changing settings will affect the cutting accuracy. However, with the double bevel miter saw, you just tilt the blade without rolling the stock and make a similar bevel cut. With this saw, you save time and make very accurate and edges. Professionals prefer this tool when engaging in large projects. However, the dual saw has its share of shortcomings. The added features make its operations more complicated for beginners. Besides, it’s more expensive compared to the single bevel miter saw. On the other hand, the single bevel miter saws are cheaper, easy to use even by beginners. It is handy for small tasks with no deadlines.

Sliding versus non-sliding miter saw

You can categorize miter saws into sliding or non-sliding miter saws.

What factors keep these tools apart?

From the name sliding, it means the saw is covering an extended distance. The saw has added rails that allow you to move the head back and forth as you cut. This feature allows the saw to cut larger board sizes of up to 12 inches.

The non-sliding miter saw is a stationary cutting tool, as the name suggests. The non-sliding saw makes the cross cuts, bevel, compound, and angled cuts. However, the size of the blade limits its cutting length. The non-sliding saw can cut up to 6 inches. This length is satisfactory for cutting most trim boards that measure 4 inches.

Which one do you choose?

Choosing the right tool depends on the projects that you are covering. When making window trims, or various crown moldings, I give the non-sliding miter saw a thumbs up. It makes quick 45 degrees cuts that are suitable for products that require joining. Besides, the short cutting distance gives more freedom in cutting other shapes apart from straight cuts. However, when you need more intricate cuts, the sliding miter saw will carry the day. The extended cutting distance increases the rate of work covered in a short period. Besides, it cuts longer pieces without the need to flip over from time to time. It’s a handy tool when making significant precise cuts. However, it is bulky and heavy, making it less portable for off-site jobs. On cost implications, the sliding saw is quite expensive compared with the non-sliding.

Final thoughts

After careful considerations, what matters most is the project that is before you. However, some factors like cost and the tool that will cover more jobs are top priorities. For beginners, it’s advisable to purchase the cheaper and portable non-sliding miter saw. This tool will be perfect before you move on to the complex sliding miter saw’s jobs.

What does double bevel mean on a miter saw?

A double bevel on a meter saw means that the power tool has an adjustable blade that makes an angled cut on the face of the board and just flips over to the other side for a similar cut. The essence of having the double bevel is that you make a cut on the board and slide it down then spin the blade for the corresponding cut. The double bevel saw is handy when making intricate cuts on crown boards, braces, and furniture legs. The power tool assures you of accuracy on these cuts. Precision ensures that the pieces fit in when it comes to assembling.

How do you identify the double bevel meter saw?

There is a high chance that you may not locate the double bevel saw in an assembly of miter saws. However, you identify it by the “V” shaped cutout designed to allow for the low angle cuts on both sides. The single bevel saw will have a low angle cutout on the left side only.

What is the difference between the single bevel and double bevel broadhead?

Welcome to the world of wild hunting!

For lovers of game hunting, the hunting gear is of paramount importance. Besides the hunter being ready and tough for the hunting scene, you need a well-prepared spear. The broadhead is the most crucial part of the spear. It is attached to the shaft of the hunting spear with the sole reason of penetrating the animal to make a kill.

The broadhead could either be single bevel or double beveled.

What is a single beveled broadhead?

The single beveled broadhead is the penetrating part of a spear that inclines on one side. That means the surface is not at the right angle in comparison to the other surface. Succinctly, it can be sharpened on one side only.

What is a double beveled broadhead?

In the double-beveled broadhead, the cutting surface is grounded on both sides. Succinctly, you can sharpen it on both sides.

Why choose the single beveled broadhead over the double-beveled broadhead?

When you fire a spear, both the single and double beveled broadhead will travel at similar speed and accuracy. The difference starts when either comes into contact with the animal’s bone. The double-beveled broadhead will pierce and force its way through the bone with a dead end. However, with the single beveled broadhead, the action does not end there. The inclined side tends to cause a torque (rotation like force) that increases the penetration power. The increased power causes massive bone splitting with the effective killing of the animal.

How does the torque (rotation) come about?

The single bevel is the reason for this rotation. When the broadhead penetrates the flesh, the pressure exerted on the unbeveled side pushes against the tissue. The tissue exerts equal and opposing pressure forcing the beveled edge of the broadhead to rotate.

What is a bevel cut?

A bevel cut is when you cut through the edge of a board at a lesser angle than 90 degrees. Usually, the boards are always squared, with the edges running at 90 degrees. If you cut this edge at any angle, then you are making a bevel cut. Also, its termed as a cut on the face of the board. The reason for this term is that when you cut, it will have a slashed appearance on its face.

Bevel cuts make furniture look more elegant when introduced on picture frames, cabinet trims, and interior moldings. Besides, they give additional support for welding and increase the surface area on edges for more stability. A bevel cut will join two pieces making them appear as one. The joint is wholly concealed for aesthetic purposes in areas where a joint would appear undesirable.

Single bevel versus double bevel knife

Let’s briefly visit the chef’s world where we compare the single and double-beveled knives.

The single bevel knife has one of its edges grounded with the other side lying flat. The angle of the grounded side ranges from 15 to 25 degrees. This range gives a wide area of choice for various applications.

The double bevel knife has both sides grounded, forming ‘V’ shapes at the meeting point. This shape makes it more resistant to cracking and rolling. It’s smaller in size and more popular in homes.

Why choose the double bevel over the single bevel?

The double bevel knife is for a general user who doesn’t need a specialized cutting knife. It requires no special skills making it useful for everyday chores like cutting vegetables, fruits, and so forth. On the other hand, the beveled knife has more accurate and more comfortable cuts on sturdy materials. This handy advantage arises when all the cutting force is exerted on one side of the blade. Besides, it has cleaner cuts and is easier to sharpen. The professional chefs prefer this beveled knife despite its high cost as compared with the double-beveled knife.

Why do you need a dual bevel miter saw?

A dual bevel meter saw has a blade that rotates to cut on both sides of the material. This feature gives the woodworker some advantages.

1. Speed

Working with a dual bevel reduces the time taken in cutting a huge pile of boards. It is a tool of choice for large construction sites and in big projects.

2. Accuracy

You maintain precision with the same settings for all your cuts. Just tilt the blade and reposition the material for the corresponding reduction.

3. Easier operations

Rotating the piece after every cut is very tiring. The double bevel saw alleviates this problem by just turning the blade for the next cut.