This essay has been submitted by a student. This is not an example of the work written by professional essay writers.
Uncategorized

Why does carpet get dirty so quickly after steam cleaning?

Pssst… we can write an original essay just for you.

Any subject. Any type of essay. We’ll even meet a 3-hour deadline.

GET YOUR PRICE

writers online

Why does carpet get dirty so quickly after steam cleaning?

Carpets are essential to the house as they act as an insulator between the feet of humans and the floor. Carpets can get dirty very quickly, so they must be regularly cleaned and well maintained. Sometimes general cleaning does not help eliminate pollutants from the carpet.

Carpet dirt removal after cleaning

If the carpet is not cleaned correctly, it can become dirty very quickly. These are the main factors that contribute to it.

Failing to vacuum before the carpet steam cleaning

It is essential to clean the floor for loose particles before steam cleaning. If the loose particles are not removed, they can come on the surface of the carpet when it dries up.

Not pre-spraying the detergent

To save time sometimes, carpet cleaners put soap into the cleaning solution being used. Hence it leaves a lot of detergents after the cleaning has been done. As a result, the carpet becomes sticky, and then there are the dust particles, which makes the carpet dirty after cleaning. Therefore, the reason there is always the necessity of pre-spraying the detergent before cleaning, so it does not leave a sticky residue but also allows for the soap to work before the steam cleaning starts.

Don't use plagiarised sources.Get your custom essay just from $11/page

Failure to rinse

Whenever there is carpet cleaning was done quickly, some of the carpet cleaners do not rinse the carpet hence leave a sticky residue on the mat, which attracts dirt, and they stick to the carpet, which makes the rug look like it has not been cleaned after a short amount of time.

Too much water on lighter carpet

Most of the carpets have jute backing, which reacts with water. The jute is brown, and if too much water is used on the carpet cleaning equipment is not set to the correct pressure, water goes to the jute backing, and then when the water disappears, then brown color wick to the end of the carpet yarns. The process is called browning and can take quite a bit of effort to remove later on.

These errors in the carpet cleaning process can take place when the carpet cleaning professionals are not adequately trained.

Wicking

Some stains resurface as a result of wicking are originate below the carpet fibers. The original stain has not only soiled the carpet fibers. It has also penetrated the carpet backing and underlying pad.

When there is the requirement of removing a stain, the carpet may have received too much moisture while rinsing the rug. An excessive rinse can saturate the area and allow water to penetrate the carpet backing and pad. The water that is rinsed then mixes with a deep stain and becomes dirty and discolored. Some of the dirty water is taken out of the carpet during the extraction portion of the cleaning process, while many of it remains behind carpet backing and pad. When the moisture evaporates, the carpet dries, and the dirty water wicks into the carpet fibers. Then the stain rises to the surface when it becomes visible.

When spots and stains reappear as soon as the carpet dries, wicking is the main reason.

Residue

Stains that reappear as a result of residue originate within the carpet fiber. Some of the soap, as well as shampoo and other cleaning agents used in the traditional cleaning process, gets left behind in the carpet. Even after the carpet dries, the residue remains. Whenever someone walks on the rug, the soil from shoes sticks to residue in carpet fibers. Any settling dust particles will follow the waste on the carpet. When carpets are cleaned with traditional methods, it becomes re-soiled very quickly. So even when there is vacuuming done, the soil stuck in the residue within the fibers would not be released.

 

Conclusion

Carpet gets dirty after steam cleaning due to the factor that carpet cleaning personnel are not adequately trained in the job they are trying to do, or the professional cleaning tries to find the more natural way but the incorrect way to clean the carpet.

Please contact XYZ for same day carpet cleaning services we can provide professional carpet cleaning at a time convenient to you.

 

 

 

 

  Remember! This is just a sample.

Save time and get your custom paper from our expert writers

 Get started in just 3 minutes
 Sit back relax and leave the writing to us
 Sources and citations are provided
 100% Plagiarism free
error: Content is protected !!
×
Hi, my name is Jenn 👋

In case you can’t find a sample example, our professional writers are ready to help you with writing your own paper. All you need to do is fill out a short form and submit an order

Check Out the Form
Need Help?
Dont be shy to ask